Whether the problem is the large number of entities in the project and lengthy modifications or the design where no one knows where to start, there is a solution.
A comprehensive set of templates
The expanded set of 2D Detail templates simplifies the design of concrete members with discontinuity regions. These templates not only make the design process easier but also inspire by showcasing various design possibilities within Detail. This template collection is available for concrete members code-checked according to Eurocode standards.
Supported types of members:
- Walls
- Beam cut-offs
- Reinforced concrete beams
- Prestressed concrete beams
- Frame joints
- Diaphragms
- Pier caps
- Foundations
- General
There are many options for each member type, which can be opened and modified according to the requirements. Alternatively, the settings of the template elements can be replicated for other cases. The template model is always created, including all reinforcement, several load cases, and necessary combinations.
Flexible point supports with defined stiffness
Walls are frequently supported by columns with specific stiffness properties. Therefore, the stiffness modification for point supports is included to accurately model this boundary condition.
The option to set stiffness for the point support can be found when using the entity Point Distributed Support, and it is allowed only when Local* direction of the support is defined.
*If the Local direction is selected:
- The option to define non-linear behavior for the support appears as a button that toggles ON/OFF.
- The option to set stiffness in the Z direction is displayed. It is inactive by default with the value "Stiff". By clicking the "Edit" button, the stiffness can be defined as a positive number greater than 0.
- Stiffness can only be defined when the support is set as "On the edge". It is not available for the "Relative to the master point" option, where only stiff support is considered.
If the Global direction is selected:
- Stiffness cannot be defined.
- The option to define the partially loaded area is hidden.
Released in IDEA StatiCa version 24.1
