In the zip file there are several examples - all but one are taken from P358 - and cover the new horizontal tying analysis method.
| BCSA_P358_DE01_A_PartialDepth | Design example 1 -Partial depth end plate - beam to beam | |
| BCSA_P358_DE02_A_PartialDepth | Design example 2 - Partial depth end plate - beam to column | |
| BCSA_P358_DE01_A_FullDepth | Design example 1 - Full depth end plate - beam to column | |
| BCSA_P358_DE02_A_FullDepth | Design example 2 - Full depth end plate - beam to column | |
| BCSA_P358_DE01_A_FinPlate | Design example 1 - Fin plate - beam to beam | |
| BCSA_P358_DE02_A_FinPlate | Design example 2 - Fin plate - beam to column | |
| BCSA_P358_DE03_A_FinPlate | Design example 3 - Fin plate - beam to SHS column | |
| BCSA_P358_DE04_A_FinPlate | Design example 4 - Fin plate - beam to CHS column |
The example taken from P398 covers the new feature welds and contact.
| BCSA_P398_APP-E_A | Design example Appendix E - column base plate |
You can view the recording of the webinar by using the following link: Connection Wednesdays - Horizontal tying & welding improvements.
These examples are provided as is and solely for your use to compare the design examples contained within the green books with the results obtained form IDEA StatiCa Connection. They should not be used for any other purpose.
